11 N
34.5 N
48 N
Item no: 0101141
8 VARIANTS
Suction cup F30MF Thermoelastic polyurethane
Suction cup of TPU, a mark-free material that leaves no trace on the object being handled. Suitable for flat surfaces. The cleats stop deformation by preventing suction of the object into the cup. The suction cup has good stability and very little movement. Also suitable when the lifting force is parallel to the surface as the cleats increase friction.
Read moreFeatures
- Suction cup of TPU, a mark free material that leaves no trace on the object being handled.
- Suitable for flat surfaces.
- Good stability and little inherent movement.
- Recommended when the lifting force is parallel to the surface of the object.
-
Industries
Glass
-
Specifications
General
Suction cup shapeFlatApplicationMark FreeMaterialThermoplastic Polyurethane (TPE-U)Suction cup modelF-MFWeight2.2 gVolume2 cm³Suction cup modelF30MFMovement, vertical max.1.4 mmCurve radius, min.44 mmFitting
Fitting optionNoneFitting sizeNoneFitting styleNoneFitting typeNoneDimension
Height10 mmOuter diameter, actuated32.6 mmOuter diameter32 mmPerformance - lifting forces
F30MF
20 -kPa60 -kPa90 -kPa13.6 N28 N42 NMaterial
NameColourTemperature-20 - 80 °CHardness81 °Shore AAlcohol++Concentrated acids-Ethanoln/aHydrolysis-Methanoln/aOil+++Oxidation++Petrol-Wear resistance+++Weather and ozone+++Dimensional drawings
This activity requires login
Please login or register to receive the full benefits of piab.com.Values specified in the data sheet are tested at:
- Room temperature: (20⁰C [68⁰F] ± 3⁰C [5.5⁰F])
- Standard atmosphere: (101.3 [29.9 inHg] ± 1.0 kPa [0.3 inHg])
- Relative humidity: 0-100%
- Compressed air quality: DIN ISO 8573-1 class 4
-
Downloads
Data sheet
-
Accessories/Spare parts
Accessories
Not sure what you need?
Use our guide to get recommendations or leave your details and we'll get in touch!
