KV-JX Cross Connector Hardware - 1
Numer przedmiotu: 02.14.509
3 Warianty

KV-JX Cross Connector Hardware

Low cost stable cross connector for joining two similar profiles.Will not interfere with components on either profile.Includes cap screw, serrated lock washer, channel nut with through hole.Drilling of one profile is required with our STB step drill.Use with L-Type profile, X-Type profile or JX-Type profile.
Zaloguj się lub utwórz konto, aby uzyskać dostęp do wszystkich naszych treści i funkcji!
PobieranieUdostępnij przez e-mail

Warianty

  • KV-L Cross Connector Hardware
    02.14.510
  • KV-JX Cross Connector Hardware
    02.14.509
  • KV-X Cross Connector Hardware
    02.14.511

Funkcje

  • Low cost stable cross connector for joining two similar profiles.
  • Will not interfere with components on either profile.
  • Includes cap screw, serrated lock washer, channel nut with through hole.
  • Drilling of one profile is required with our STB step drill.
  • Use with L-Type profile, X-Type profile or JX-Type profile.