|Hose stud TC 2"OD-Ø51||0120794|
|Clamp sealing Ø50.8x1.65 EPDM FDA||0117557|
|Clamp ring 51, stainless steel, cast||0104043|
|Hose clamp D=50-65||3113824|
|Hose clear PVC 25 per metre||0207843|
|Hose clear PVC 32 per metre||0207844|
|Hose clear PVC 38 per metre||0207845|
|Hose clear PVC 50 per metre||0207846|
|Hose clear PVC 63 per metre||0207847|
|Hose clear PVC 75 per metre||0207848|
|Hose clear PVC 100 per metre||0207849|
Hose connector TC2"OD - Ø51 cpl
They definitely can. Please see our success stories.
Yes. Piab has experience of conveying a large variety of tablets and capsules without damage. Please contact us for detailed information.
No it can’t. Normal procedure is to dose before or after conveying.
No we can’t. It’s extremely difficult to control the amount of liquid coming in the conveyor.
Yes, up to 8-10 meters without accessories/pipe emptying solution. With a pipe emptying solution up to about 25 meters.
For piFLOW®p we can supply this documentation. It is a template that shall be filled in during start up and with the help of the manual that comes with the shipment.
No, the conveyors use only compressed air. Even our control systems are pneumatic.
Piab offers a warranty to distributors, integrators and users of Piab products worldwide as per the following definitions:
In the manual for conveyors there is one section about troubleshooting. You are also welcome to contact nearest Piab company.
0 – 50 meters if the conveying length does not include a vertical lift more than 5m and the product density is between 0.5-1.0kg.
By having the right mix of air and conveyed product. This is achieved from where the Piab conveyor draws the material with the help of our feeding point accessories. Please also read our white paper on segregation and contact any Piab company for further information.
No they are not, only for under pressure.
Not if instructions in the manual are followed. All Piab conveyors have a grounding point. All our conveyors can be sent with ATEX dust approval.
Tool are not really needed for assembly/de-assembly. For more detailed information, please look in the manual or in our YouTube channel.
From about 0.1ton/h to about 15ton/h.
Please use the application configurator. You are also welcome to contact Piab or a Piab partner for details.
With regular maintenance, the unit will do the job for years to come.
If the compressed air is dirty/has fluid in it, the filter can be clogged as well as the ejectors and the timers.Water in the air line is not optimal.
Consult the manual for troubleshooting if you would encounter anything unusual.
Conveyor, filter regulator (1” connection)
piFLOW®p is made of stainless steel 316L.
piFLOW® i and f are made of stainless steel 304.
To a large number of Piab conveyors we can offer FDA, ATEX Dust and Gas, 2.2 certificates.
Stainless steel, aluminum, or PE, aspirated and non-aspirated feed wands
Feed adapter with or without flange connection
Remote start/stop valve
Transition from the unit to downstream equipment
Pleated rod. Filtration grade 0,5µm. a hard rod filter in PE and PUR material with a PTFE membrane. Comes in black and white version.
Pleated, Filtration grade 0,5µm. A hard polyester and PUR filter with a PTFE membrane. Grey colour.
Textile. Filtration grade 5,0µm filterbag in polyester and a ePTFE membrane. Light grey colour.
Compressed air with normal industry pressure of 0.4-0.6 MPa.
It depends on the physical properties of the granules. Piab has experience of conveying a big variety of granules, tablets and capsules without damage. Please contact us for detailed information.
Please log in or Register first in order to be able to request quotes.