180 N
450 N
660 N
Item no: 0223820
P100 - Suction cup - G1/2"
The P100 suction cups with G1/2" female fitting are particularly suitable for handling strongly structured, uneven flat surfaces such as stone tiles, wood or checker plates. Made of aluminum with an EPDM rubber profile seal that can be easily replaced, when worn out, they enable the use of vacuum technology on surfaces for which it has so far not been considered.
Read moreFeatures
- Suitable for handling of flat, structured and uneven surfaces like checker plates or stone tiles.
- The profile list, manufactured in EPDM, is soft and can take up height differences of a few mm.
- High lifting force compared to its size due to the rigid aluminum plate.
- The cup is designed to handle vertical lift forces. Subjecting the cup of parallel lift forces is not recommended.
-
Industries
Wood
-
Specifications
General
Suction cup shapeFlatApplicationMarkFree, PlasticInjectionMoldedParts, DrySheetMetalSuction cup designRoundCharacteristicsMarkFree, DrySheetMetal, PlasticInjectionMoldedPartsMaterialEthylene Propylene (EPDM)Weight244 gVolume55 cm³Suction cup modelP100Movement, vertical max.3 mmMaterialAlFitting size1/2"Fitting styleFemaleFitting typeG-threadHeight (C)20 mmOuter diameter (A)107.5 mmPerformance - lifting forces
P100
20 -kPa60 -kPa90 -kPaValues specified in the data sheet are tested at:
- Room temperature: (20⁰C [68⁰F] ± 3⁰C [5.5⁰F])
- Standard atmosphere: (101.3 [29.9 inHg] ± 1.0 kPa [0.3 inHg])
- Relative humidity: 0-100%
- Compressed air quality: DIN ISO 8573-1 class 4
-
Downloads
Data sheet
Certificates
-
Accessories/Spare parts
Spare parts
