제품번호: 0202360
4 제품
Value Line® Inline vacuum generator 6mm
Light weight and small sized vacuum ejectors with integrated push-in fittings. One is made with a T-design that will allow exhaust air to be piped away. The other one is a typical inline design. The T-design is also suitable for clean-room environments. Even though it is in our Value Line®, the ejectors will still show approximately 30% energy saving compared to a similar 0.7 mm competitor ejector. The products are available globally with off-the-shelf deliveries.
더 읽기
특장점
- Ejector with improved vacuum performance compared to corresponding size conventional single-stage ejector.
- Ejector stage without flap valve gives high reliability in dirty and dusty environments.
- Light weight body.
- Integrated push-in fittings or thread connection for quick and low cost installation.
- Available in “Inline”, “T-design” or aluminum block version.
- The T-design is suitable if exhaust air needs to be piped away.
- The VL206 1/8” block version is an easy-to-install alternative, targeting operators of basic automated vacuum systems.
-
사양
일반
MaterialPA, SS, AL, CUZN, NBRNoise level70 - 83 dBA온도, 최소14 - 176 °FWeight12 gAir consumption (최적의 공급압력 기준)0.32 Nl/sFeed pressure, max.0.7 MPaFeed pressure, optimum0.5 MPa공급 압력 에어 소비량 진공도 (-kPa) 에 따른 진공흡입유량 (Nl/s) 최대 진공도 MPa Nl/s 0 10 20 30 40 50 60 70 80 90 -kPa 0.5 0.32 0.29 0.26 0.23 0.2 0.15 0.1 0.05 0 0 0 70 공급 압력 에어 소비량 진공도 (-kPa) 에 도달하는 배기 시간 (s/l) 최대 진공도 MPa Nl/s 10 20 30 40 50 60 70 80 90 -kPa 0.5 0.32 0.36 0.77 1.14 1.81 2.61 3.94 0 0 0 70 -
다운로드
-
부속품/예비품
부속품
