Choisir votre langue


Nous utilisons des cookies pour vous garantir la meilleure navigation possible sur notre site internet.
Si vous continuez sans changer vos paramètres, nous considérons que vous acceptez de recevoir tous les cookies du site


Suction cup F-OB 20x40 Silicone, G1/8"male SS, FCM, 0207046


article n° 0207046

  • The silicone material complies with FDA 21 CFR 177.2600 and EU 1935/2004.
  • Transparent color without pigment
  • Long lasting high-end silicone material
  • Excellent grip on oblong parts such as flow-packs and stick-packs
  • Available with threaded and integrated stainless steel fittings.
  • Easy to clean with hygienic design. No dust/dirt pockets.
Métrique   Impérial
Curve radius 9 mm
Movement, vertical max. 7,6 mm
Application Conformité FDA EU
Matériaux ASTM 316L, Silicone (SIL non-detectable FCM)
Modèle de ventouse F-OB
Forme Ovale à Soufflet
Volume 5 cm³
Masse 27 g
Tailles des fixations 1/8"
Genre de la fixation Mâle
Type de fixation Filetage Gaz
Options de fixation Aucun
Hauteur 36 mm
Longueur 40,8 mm
Largeur 20,8 mm
Performances - forces de levage
Force de levage perpendiculaire Force de levage parallèle
10 -kPa 3,3 N 2,9 N
20 -kPa 6,9 N 6 N
40 -kPa 12 N 12,6 N
Silicone (SIL non-detectable FCM)
Couleur Bleu
Dureté 40 °Shore A
Température -40 – 200 °C
Résistance des matériaux
Silicone (SIL non-detectable FCM)
Alcool ++
Acides concentrés -
Éthanol N/A
Hydrolyse +
Méthanol N/A
Huiles -
Oxydation +++
Pétrole -
Résistance à l’usure ++
Climat & ozone +++

Schémas dimensionnels

Veuillez vous connecter ou Inscription pour voir les schémas dimensionnels

Formation (4)
    • Ventouses

      • Comment doit-on stocker les ventouses Piab ?
      • How do I know which lifting forces I need?
        • It depends on the weight of the product that should be lifted and how many suction cups that can be used for the object. Calculate the weight to be lifted per suction cup and then take the weight multiplied with the gravity force (g=9.81) and you have the lifting force needed in Newton (N)

      • How do I know which suction cup to choose?
        • Our recommendation is to start at the application listing to find the products we recommend to different applications. If you have questions please do not hesitate to contact our partners to find the optimum solution.

      • I have a variation of number of objects to be lifted- how can I make sure to not drop them or to use too much energy? How to optimize this type of system?
        • All suction cups not in contact with an object (open) will draw in a lot of air and demand a larger pump than actually necessary. By using different valves, such as piSAVE sense, in the suction cups, the suction cups will be normally closed until they come in contact with the handled object. Only the cups needed in the specific lifting cycle will be open and flow air. Please see the video piSAVE sense.

      • What is DURAFLEX®?
        • DURAFLEX® is a patented material specially developed to feature the elasticity of rubber and the wear resistance of polyurethane. The DURAFLEX® material is mark-free.

    Demande de devis

    Veuillez vous connecter ou Inscription d'abord pour demander un devis

    Piab AB © 2017 Mentions légales