Elige tu idioma

Cerrar

Utilizamos cookies propias y de terceros para ofrecerte una mejor experiencia cuando visites nuestro sitio web, mejorando nuestros servicios y adecuando el contenido de
acuerdo a tus hábitos de navegación. Si no cambias los ajustes de tu navegador, entenderemos que estás de acuerdo en recibir todas las cookies del sitio web piab.com.
Leer más


Suction cup BFFT50P Polyurethane 60/60/30, T-slot, with mesh filter, 0206524

0206524

Artículo No. 0206524

  • Special designed friction cups for thin (0.6-0.8 mm) oily metal sheets, such as outer body car parts in a press-to press forming process.
  • Long lasting material, normal wear on friction cup will not affect the long term grip performance.
  • Refined internal friction pattern provides additional grip performance, the suction cups can withstand high shear forces, typically 3–5 times more than corresponding conventional suction cups.
  • Best choice if > 0.1g/m2 press oil is used on the sheet but also a great choice for dry metal sheets.
  • The "BFFT" design is suitable for thin flat or uneven/curved surfaces and if level compensation is needed, for example in de-stacking applications.
  • The flat inner support, made of dual hardness, gives stability and good grip during movement in any orientation.
  • DURAFLEX® suction cups manufactured in a specially developed material that features the elasticity of rubber and wear resistance of polyurethane. The material does not leave any marks on the objects handled and has a fantastic elastic memory, even after hundreds of thousands of cycles.
Métrico   Imperial
General
Curve radius 85 mm
Movement, vertical max. 11 mm
Aplicación Chapa metálica aceitosa
Material Poliuretano (PU60)
Modelo de ventosa BFFT
Forma Fuelles
Volumen 14,8 cm³
Peso 67,8 g
Conexión
Modelo de conexión T-slot
Opciones de conexión Filtro de red
Dimension
Altura 36,6 mm
Exterior Dimensiones 53 mm
Exterior Dimensiones, accionado 54,4 mm
Rendimiento - fuerzas de elevación, Oily metal sheet
Fuerza de elevación vertical Fuerza de elevación paralela
60 -kPa 104 N 61 N
90 -kPa 145 N 85 N
Rendimiento - fuerzas de elevación, Dry metal sheet
Fuerza de elevación vertical Fuerza de elevación paralela
60 -kPa 105 N 122 N
90 -kPa 146 N 155 N
Material
Poliuretano (PU60) Poliuretano (PU60) Poliuretano (PU30)
Color Naranja Verde transparente Amarillo
Dureza 60 °Shore A 60 °Shore A 30 °Shore A
Temperatura 10 – 50 °C 10 – 50 °C 10 – 50 °C
Resistencia del material
Poliuretano (PU60) Poliuretano (PU60) Poliuretano (PU30)
Alcohol N/A N/A N/A
Ácidos concentrados + + +
Etanol + + +
Hidrólisis + + +
Metanol - - -
Aceite +++ +++ +++
Oxidación - - -
Gasolina + + +
Resistencia al desgaste +++ +++ +++
Tiempo & ozono +++ +++ +++

Dibujos dimensionados

Inicie Sesión o Registrarse Para ver los planos dimensionales

Soporte
Archivo CAD
Utilice la versión de escritorio / PC para descargar archivos CAD.
Hojas técnicas
Folletos (1)
Certificados (1)
Formación (4)
    • Suction cups

      • How do I know which lifting forces I need?
        • It depends on the weight of the product that should be lifted and how many suction cups that can be used for the object. Calculate the weight to be lifted per suction cup and then take the weight multiplied with the gravity force (g=9.81) and you have the lifting force needed in Newton (N)

      • How do I know which suction cup to choose?
        • Our recommendation is to start at the application listing to find the products we recommend to different applications. If you have questions please do not hesitate to contact our partners to find the optimum solution.

      • How should Piab suction cups be stored?
      • I have a variation of number of objects to be lifted- how can I make sure to not drop them or to use too much energy? How to optimize this type of system?
        • All suction cups not in contact with an object (open) will draw in a lot of air and demand a larger pump than actually necessary. By using different valves, such as piSAVE sense, in the suction cups, the suction cups will be normally closed until they come in contact with the handled object. Only the cups needed in the specific lifting cycle will be open and flow air. Please see the video piSAVE sense.

      • What is DURAFLEX®?
        • DURAFLEX® is a patented material specially developed to feature the elasticity of rubber and the wear resistance of polyurethane. The DURAFLEX® material is mark-free.

    Pedir una cotización

    Inicie Sesión o Registrarse Primero para poder solicitar ofertas.

    Piab AB © 2017 Aviso legal

    Síguenos

    Contáctenos